M+S Hydraulics is a leading manufacturer of hydraulic motors, hydraulic steering systems, valves, brakes and accessories. M+S Hydraulics is certified according to ISO 9001:2000 and thus guarantees a consistently high product quality worldwide.
M+S Hydraulics aims to provide the customer with the best possible quality, the most competitive price and the best service.
We are now able to offer M+S hydraulic components at a competitive price with short delivery times.
Content
MM
Gerotormotors type MM from M+S Hydraulics are available in sizes from 8,2 – 50 ccm/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 140 bar in continuous operation, and the maximum inlet volume flow is up to 25 l/min. Torques of up to 45 Nm are achieved in continuous operation. Gerotormotors type MM are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. The permissible radial shaft load depends on the speed and the distance of the force application point. Corresponding details can be found in our catalog.
MM type hydraulic motors are used in salt and fertilizer spreaders, small belt drives, small sweepers and many other applications. Extensive accessories are available for MM hydraulic motors (e.g. speed sensor, pressure relief valve in the end cover, stainless steel bushing in the sealing area).
The MM motor is similar in design to the OMM from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
MP
M+S gerotor engines of the MP type are available in sizes from 25 – 630 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 175 bar in continuous operation, and the maximum inlet volume flow is up to 60 l/min. Nominal torques of up to 440 Nm are achieved. Gerotormotors type MP are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. There are different flange and shaft variants available, corresponding details can be found in the catalog.
MP type hydraulic motors are used in sweepers, belt drives, loader wagons, winches, forestry machines and many other applications.
The MP motor is similar in design to the Sauer/Danfoss OMP. The oil motor is interchangeable with all current manufacturers.
MR
M+S gerotor engines of the MR type are available in sizes from 50 – 400 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 175 bar in continuous operation, and the maximum inlet volume flow is up to 60 l/min. Torques of up to 610 Nm are achieved. Gerotormotors type MR are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. There are different flange and shaft variants available, corresponding details can be found in the catalog.
MR type hydraulic motors are used in sweepers, belt drives, loader wagons, winches, forestry machines and many other applications.
The MR motor is similar in design to the OMR from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
MH
M+S gerotor engines type MH are available in sizes from 200 – 500 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is 200 bar in continuous operation, and the maximum inlet flow rate is up to 75 l/min. Torques of up to 820 Nm are achieved. Gerotormotors type MH are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. There are different flange and shaft variants available, corresponding details can be found in the catalog.
MH type hydraulic motors are used in conveyor belts, textile machines, machine tools, food industry, agricultural machines and many others.
The MH motor is similar in design to the OMH from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
HW
M+S gerotor engines of type HW are available in sizes from 125 – 550 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is 210 bar in continuous operation, and the maximum inlet volume flow is up to 75 l/min. Torques of up to 960 Nm are achieved. Gerotormotors type HW are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. There are different flange and shaft variants available, corresponding details can be found in the catalog.
HW type hydraulic motors are used in conveyor belts, textile machines, machine tools, food industry, agricultural machines and many others.
MS
M+S gerotor engines of the MS type are available in sizes from 80 – 565 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 230 bar in continuous operation, and the maximum inlet volume flow is up to 75 l/min. Torques of up to 850 Nm are achieved. Gerotormotors type MS are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. There are different flange and shaft variants available, corresponding details can be found in the catalog.
MS type hydraulic motors are used in conveyor belts, metalworking machines, industrial machines, construction machines, agricultural machines and many others.
The MS motor is similar in design to the OMS from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
MT
M+S MT type gerotor engines are available in sizes from 160 – 725cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 210 bar in continuous operation, and the maximum inlet volume flow is up to 125 l/min. Torques of up to 1300 Nm are achieved. Gerotormotors type MT are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. Different flange and shaft variants are available, corresponding details can be found in the catalog.
MT type hydraulic motors are used in conveyor belts, metalworking machines, machine tools, injection molding machines, construction machines, agricultural machines and many others.
The MT motor is similar in design to the OMT from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
MTM
M+S gerotor engines of the MTM type are available in sizes from 200 – 725cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 270 bar in continuous operation, and the maximum inlet volume flow is up to 125 l/min. Torques of up to 1830 Nm are achieved. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. Different flange and shaft variants are available, corresponding details can be found in the catalog.
MTM type hydraulic motors are used in mini excavators, metal working machines, earth drills, wood processing industry, construction machinery, agricultural machinery and many others.
The MT motor is similar in design to the TMTHW from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
TMF
M+S gerotor motors type TMF are available in sizes from 200 – 725 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 270 bar in continuous operation, and the maximum inlet flow rate is up to 125 l/min. Torques of up to 1750 Nm are achieved. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. Different flange and shaft variants are available, corresponding details can be found in the catalog.
TMF type hydraulic motors are used in tunneling machines, metalworking machines, forestry machines, construction machines, agricultural machines and many others.
The MT motor is similar in design to the TMTW from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
MV
M+S gerotor engines of the MV type are available in sizes from 315 – 800 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 210 bar in continuous operation, and the maximum inlet volume flow is up to 200 l/min. Torques of up to 1880 Nm are achieved. Gerotormotors type MV are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. Different flange and shaft variants are available, corresponding details can be found in the catalog.
MV type hydraulic motors are used in conveyor belts, metalworking machines, machine tools, injection molding machines, construction machinery, agricultural machinery and many others.
The MV motor is similar in design to the OMV from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
MVM
M+S gerotor engines of the MVM type are available in sizes from 315 – 800 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 250 bar in continuous operation, and the maximum inlet volume flow is up to 200 l/min. Torques of up to 2590 Nm are achieved. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. Different flange and shaft variants are available, corresponding details can be found in the catalog.
MVM type hydraulic motors are used in conveyor belts, metalworking machines, earth drills, injection molding machines, construction machines, agricultural machines and many others.
VMF
M+S type VMF gerotor engines are available in sizes from 315 – 800 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 270 bar in continuous operation, and the maximum inlet volume flow is up to 200 l/min. Torques of up to 2590 Nm are achieved. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. Different flange and shaft variants are available, corresponding details can be found in the catalog.
VMF type hydraulic motors are used in tunnel boring machines, metal working machines, forestry machines, construction machines, agricultural machines and many others.
The VMF motor is similar in design to the TMVW from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.
- Mobile control block - 13. May 2023
- Hydraulics lowering brake valves - 6. May 2023
- axial piston engines - 2. May 2023
