Hydromot hydraulic motors - Different series and their characteristics -

CPMM

CPMM type gerotor motors are available in sizes from 8.2 – 50 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 100 bar in continuous operation, and the maximum inlet volume flow is up to 25 l/min. Nominal torques of up to 49 Nm are achieved. Gerotormotors type CPMM are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. The permissible radial shaft load depends on the speed and the distance of the force application point. Corresponding details can be found in our catalog.

CPMM type hydraulic motors are used, among others, in salt and fertilizer spreaders, small belt drives, small sweepers and many others.

The CPMM motor is similar in design to the OMM from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.

CPM

CPMM type hydraulic motors are used, among others, in salt and fertilizer spreaders, small belt drives, small sweepers and many others.

The CPMM motor is similar in design to the OMM from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.

CPRM

CPRM type gerotor motors are available in sizes from 36 – 400 cc/rev. The maximum permissible inlet pressure, depending on the sip volume, is a maximum of 175 bar in continuous operation, and the maximum inlet volume flow is up to 60 l/min. Nominal torques of up to 580 Nm are achieved. Gerotor motors type CPRM are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. A high-pressure shaft seal is installed as standard. The permissible radial shaft load depends on the speed and the distance of the force application point. Various flange and shaft variants are available, please refer to our catalog for corresponding details.

CPRM type hydraulic motors are used in sweepers, belt drives, loader wagons, balers, winches, forestry machines and many more.

The CPRM motor is similar in design to the OMR from Sauer/Danfoss. The oil motor is interchangeable with all current manufacturers.

CPMH

CPMH type gerotor motors are available in sizes from 200 – 500 cc/rev. The maximum permissible inlet pressure is 200 bar in continuous operation, and the maximum inlet flow rate is up to 75 l/min. Nominal torques of up to 850 Nm are achieved. Gerotormotors type CPMH are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. The permissible radial shaft load depends on the speed and the distance of the force application point. Various flange and shaft variants are available, please refer to our catalog for corresponding details.

CPMH type hydraulic motors are used in belt drives, loader wagons, winches, forestry machines and many other applications.

CPMS

CPMS type gerotor motors are available in sizes from 80 – 475 cc/rev. The maximum permissible inlet pressure is 250 bar in continuous operation, and the maximum inlet flow rate is up to 75 l/min. Nominal torques of up to 910 Nm are achieved. Gerotormotors type CPMS are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. The permissible radial shaft load depends on the speed and the distance of the force application point. Angular contact roller bearings in the front flange make CPMS motors suitable for transmitting higher radial forces. Various flange and shaft variants are available for CPMS motors, you will find corresponding detailed information in our catalog.

CPMS hydraulic motors are used in belt drives, cable winches, as wheel drives in forestry and construction machinery, plastic injection molding machines, etc. The oil motor is similar in design to the Sauer/Danfoss OMS. The oil motor is interchangeable with all current manufacturers.

CPMT

CPMT type gerotor motors are available in sizes from 160 – 800 cc/rev. The maximum permissible inlet pressure is 210 bar in continuous operation, and the maximum inlet flow rate is up to 125 l/min. Nominal torques of up to 1464 Nm are achieved. Gerotormotors type CPMT are suitable for operation without leakage oil, the maximum permissible pressure on the shaft seal depends on the output speed. The permissible radial shaft load depends on the speed and the distance of the force application point. Angular contact roller bearings in the front flange make CPMT motors suitable for transmitting higher radial forces. Various flange and shaft variants are available for CPMT motors, you will find corresponding detailed information in our catalog.

CPMT type hydraulic motors are used, among other things, in belt drives (e.g. in crushing machines), cable winches, roller drives, cone clamps, as wheel drives in forestry and construction machines, plastic injection machines, and many more.

The oil motor is similar in design to the Sauer/Danfoss OMT. The oil motor is interchangeable to all common manufacturers.