Hydromot hydraulic orbital motors - Good and favourable

Hydromot hydraulic orbital motors are slow-running hydraulic motors. Hydraulic oribtal motors are also referred to as gerotor motors or oil motors. They are characterized by a large displacement volume with small device dimensions. Our hydraulic oribtal motors undergo strict quality control and are tested in the factory according to our specifications. This ensures consistent quality.
Our oil motors are interchangeable with Danfoss, Eaton, White, Bosch-Rexroth, etc. For further information please visit our hydraulic guide.

 

Hydromot Oil motors, hydraulic motors - selection

Catalog image1 Hydraulic Motor CPRM80CD
Hydraulic Motor CPRM80CD
  • hydraulic motor CPRM80CD
  • displacement: 80 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 28
  • 2-hole SAE A flange
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPRM80CD motors are interchangeable to the following manufacturers:
​
CPRM80CD
Danfoss OMR80 (151-0211, 151-0411, 151-0451, 151-0711, 151-0751, 151-6051)
Danfoss VMR 80 (11136673, 11125716)
M+S Hydraulic (MR80C, MR80CD)
Hydraulik Nord GMR 80 (620-F202)
White WR (255090A6312AAAAA)
Eaton S-Serie (103-2737)
SAM / Brevini BRE (BRE0802AM08CL250N)
170,22 EUR
145,49 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
145,49 EUR excl. 17% tax
hydraulic motor cpmm20c front
Hydraulic Motor CPMM20C
  • hydraulic motor CPMM20C
  • displacement: 20 ccm/REV
  • rear ports: G 3/8’’
  • shaft: Ø 16 mm cylindrical with key 5 x 5 x 16
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
117,55 EUR
100,47 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
100,47 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPMT400C
Hydraulic Motor CPMT400C
  • hydraulic motor CPMT400C
  • displacement: 400 ccm/REV
  • ports: G 3/4’’
  • shaft: Ø 40 mm cylindrical with key A12 x 8 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMT400C motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0204, OMT 400 M. 40MM-WELLE             
  • Danfoss, 151B0364, OMT 400 M. 40MM-WELLE S.2      
  • Danfoss, 151B3004, OMT 400  
  • Hydrauliknord, 650-P401, GMT 400      

 
576,94 EUR
493,11 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
493,11 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPMV1000C
Hydraulic Motor CPMV1000C
  • hydraulic motor CPMV1000C
  • displacement: 1000 ccm/REV
  • ports: G 1’’
  • shaft: Ø 50 mm cylindrical with key A14 x 9 x 70
  • 4-hole square flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
  • Applications: log splitter, drilling maschines


 
895,12 EUR
765,06 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
765,06 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPMS400C
Hydraulic Motor CPMS400C
  • hydraulic motor CPMS400C
  • displacement: 400 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 32 mm cylindrical with key A10 x 8 x 45
  • 4-hole SAE flange
  • disc valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMS400C motors are interchangeable to the following manufacturers:

CPMS400C
Danfoss OMS400 (151F0305, 151F0605)
M+S Hydraulic (MS400C)
White WS (355400AH321AAAAA)
Eaton 2000 (104-1391, 104-3046-006)
SAM / Brevini HRS (HRS400A4M09CL320N)
 
342,61 EUR
292,83 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
292,83 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPMH250CB
Hydraulic Motor CPMH250CB
  • hydraulic motor CPMH250CB
  • displacement: 250 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 35 mm cylindrical with key A10 x 8 x 45
  • 4-hole oval flange (magneto flange)
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
275,97 EUR
235,87 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
235,87 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPMS200SL
Hydraulic Motor CPMS200SL
  • hydraulic motor CPMS200SL
  • displacement: 200 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 34.75 mm P.T.O. DIN9611 Form 1
  • 4-hole SAE flange
  • disc valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMS200SL motors are interchangeable to the following manufacturers:
  • Danfoss, 151F0264, OMS 200   
325,85 EUR
278,50 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
278,50 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CMERF6B200S
Hydraulic motor CMERF6B200S
  • hydraulic motor CMERF6B200S
  • displacement: 200 ccm/REV
  • ports: BSPP G 1/2"
  • shaft: splined, SAE 6B
  • 6-hole SAE A flange
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
  • Alternative to White 
414,67 EUR
354,42 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
354,42 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPMVW630K
Hydraulic Motor CPMVW630K
  • hydraulic motor CPMVW630K
  • displacement: 630 ccm/REV
  • ports: G 1’’
  • shaft: conical 1:10 with key B16 x 10 x 32
  • wheel flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMVW630K motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0032, OMVW 630 M. KEGL.WELLE
  • Danfoss, 151B0273, OMVW 630 M. KEGL.WELLE
  • Danfoss, 151B3123, OMVW 630
829,17 EUR
708,69 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
708,69 EUR excl. 17% tax
hydraulic motor cpmms70c front
Hydraulic Motor Minimotor CPMMS70C
  • hydraulic motor CPMMS70C
  • displacement: 70 ccm/REV
  • side ports: G 3/8’’
  • shaft: Ø 16 mm cylindrical with key 5 x 5 x 16
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces


Our CPMMS70C motors are interchangeable to the following manufacturers:

CPMMS70C
Danfoss OMM70 
M+S Hydraulic (MMS70C)
Eaton J-2 (129-0023, 129-0373)
White WM (125020JKBC4A)

134,64 EUR
115,08 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
115,08 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPMTW500K
Hydraulic Motor CPMTW500K
  • hydraulic motor CPMTW500K
  • displacement: 500 ccm/REV
  • ports: G 3/4’’
  • shaft: conical 1:10 with feather key B12 x 8 x 28
  • wheel flange
  • disc valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMTW500K motors are interchangeable to the following manufacturers:
  • Danfoss, 151B0198, OMTW 500 M. KEGL.WELLE
  • Danfoss, 151B3035, OMTW 500
653,66 EUR
558,68 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
558,68 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPMF100CD
Hydraulic Motor CPMF100CD
  • hydraulic motor CPMF100CD
  • displacement: 100 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 28
  • 4-hole oval flange (magneto flange)
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
Our CPMF100CD motors are interchangeable to the following manufacturers:
 
158,01 EUR
135,05 EUR excl. 17% tax
incl. 17% tax excl. Shipping costs
135,05 EUR excl. 17% tax
1 to 12 (from a total of 12)

Best-selling products in this category

hydraulic motor cpmms32c front
Hydraulic Motor Minimotor CPMMS32C
  • hydraulic motor CPMMS32C
  • displacement: 32 ccm/REV
  • side ports: G 3/8’’
  • shaft: Ø 16 mm cylindrical with key 5 x 5 x 16
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

Our CPMMS32C motors are interchangeable to the following manufacturers:

CPMMS32C
Danfoss OMM32 
M+S Hydraulic (MMS32C)
Eaton J-2 (129-0023, 129-0373)
White WM (125020JKBC4A)


 

120,83 EUR
103,27 EUR excl. 17% tax
103,27 EUR excl. 17% tax
Catalog image1 Hydraulic Motor CPRM200CD
Hydraulic Motor CPRM200CD
  • hydraulic motor CPRM200CD
  • displacement: 200 ccm/REV
  • ports: G 1/2’’
  • shaft: Ø 25 mm cylindrical with key A8 x 7 x 28
  • 2-hole SAE A flange
  • spool valve type
  • internal check valve
  • incl. high pressure seal up to 150 bar
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces

Our CPRM200CD motors are interchangeable to the following manufacturers:

CPRM200CD
Danfoss OMR200 (151-0214, 151-0415, 151-0455, 151-0715, 151-0755)
Danfoss VMR 200 (11136677, 11125722)
M+S Hydraulic (MR200C, MR200CD)
Hydraulik Nord GMR 200 (620-L102)
White WR (255200A6312AAAAA)
Eaton S-Serie (103-2807)
Eaton S-Plus (103-1466)
SAM / Brevini BRE (BRE2002AM08CL250N)
 
192,65 EUR
164,66 EUR excl. 17% tax
164,66 EUR excl. 17% tax
hydraulic motor cpmm32c front
Hydraulic Motor CPMM32C
  • hydraulic motor CPMM32C
  • displacement: 32 ccm/REV
  • rear ports: G 3/8’’
  • shaft: Ø 16 mm cylindrical with key 5 x 5 x 16
  • spool valve type
  • internal check valve
  • usage without drain line possible
  • OEM quality
  • optimized for small spaces
120,83 EUR
103,27 EUR excl. 17% tax
103,27 EUR excl. 17% tax
Oval flange for CPMM
Oval flange for CPMM
  • Oval flange for hydraulic motors CPMM
  • including 3 mounting screws
12,07 EUR
10,32 EUR excl. 17% tax
10,32 EUR excl. 17% tax